Plastic Oil-water separation chamber | grease interceptor|household kitchen oil and water filtration separation

Oil and water isolation well, is composed of oil collecting Plastic chamber, water collecting chamber and oil slick, sundries collection device, used to separate and collect solid dirt and grease in catering wastewater.

The sewage from the kitchen is discharged into the oil trap through the drain pipe and then into the sewer after filtration.

The oil separator Board  in the oil chamber separates the oil pollution with less specific gravity than water from the water,greatly reduces the pressure of the sewage system, and solves the problem of oil pollution blocking sewers and environmental pollution, which is especially suitable for household use.

Plastic oil pollution isolation wells are widely used in the new rural sewage pipe network transformation, household kitchen oil and water filtration separation.

The oil pollution isolation shell is formed once by injection molding process, the whole seal, no leakage, high strength, impact resistance, large compressive load, acid and alkali resistance, corrosion resistance, light and durable, simple and convenient installation, economical and affordable, good oil and water separation effect, long service life. also used in the drainage treatment of food processing enterprises. It can also be modified to serve as an oil-water filter for restaurants and restaurants.

1. the setting of the separated oil well, it can reduce the pollution of the sewage to the water; In general, after being treated by the sewage treatment plant, it is found that the water quality can not reach the design treatment effect at all, so the sewage continues to discharge directly into the water body and pollute the environment;Most of the reasons for this situation are that the water body is attached with oil mucous membrane, and the sewage treatment equipment can not completely separate the oil and water, and after setting up the oil separation well, the oil slick and sediment in the water can be cleaned up in advance by using the mesh basket in the oil separation well before the sewage enters the main pipe, so as to do the pretreatment for the later stage sewage treatment.

2. the installation of separate wells can greatly reduce the maintenance cost of the pipe network. If there are no separate wells, the oil floats and large particles of impurities in the sewage can easily be deposited and agglutinated in the pipeline and inspection wells, resulting in the deposition and blockage of the pipeline over a long period of time. From the current reasons for the pipeline blockage analysis, oil is the main culprit, there is no separate oil wells, oil directly into the pipeline is particularly easy to adsorb around the pipe wall, cumulative effective cross section of the pipeline will become smaller, light impact over water, heavy Block the pipe.